Are your pool steps looking dirty and grimy? Do they look as if they need a deep cleaning and scrubbing? They probably do. You may even have noticed black mildew on your pool steps.
Maybe you have never cleaned the steps of your fiberglass swimming pool before, meaning you are in for a difficult job. You will, however, be more knowledgeable on how to remove stains from fiberglass pool steps after reading this post.
Let’s look at what the fiberglass pool steps are and how to properly clean fiberglass pool steps to get them nice and shiny again.
Table of Contents
What Is a Fiberglass Pool Step?
Fiberglass pools are made of a material called fiberglass, which is a type of plastic. It has many advantages over other pools: it is less expensive to buy, easier to maintain, and less likely to develop leaks.
Fiberglass pool steps are usually constructed with a high-quality resin, making them more durable than other ladders. Some people choose to install these ladders in their pools for safety reasons since they are more stable than other ladders.
Fiberglass pools do not require resurfacing or hard-facing except for concrete pools. Because fiberglass does not affect the pH of the water, fewer chemicals are required in fiberglass pools. Body oils, suntan creams, and airborne pollutants can gather on fiberglass pool walls and tiles, as they can in any pool. Pools made of fiberglass should not be emptied for cleaning. The residue may be removed with pool cleaning products.
Cleaning fiberglass pool stairs is not simple, but it’s not as tough as you may imagine with the correct equipment and expertise.
You’ll need the following items to help the procedure run more smoothly:
- A rake for the pool
- Vinyl tile cleanser, mild
- Abrasion-resistant cloth
- A gentle pool brushes
Fiberglass Pool Steps Cleaning Instructions
It is essential to clean fiberglass pool steps as soon as possible to prevent the dirt from accumulating and getting into the water.
Pool steps can get dirty from the pool, weather, and dirt from people walking on them. The best way to clean them is to use a pressure washer and a brush attachment.
The steps to cleaning fiberglass pool steps are pretty straightforward
- Step 1: Using a pool rake, push scum toward the pool’s main drain. Because algae do not become caught in the pores of fiberglass pools like it does in cement pools, algae cleaning is straightforward.
- Step 2: Clean the unclean, discolored pool portions with a mild vinyl tile cleaner. On fiberglass pool surfaces, abrasive cleaners should be avoided.
- Step 3: With a non-abrasive towel, wipe away the cleanser and the muck. If the material is stubborn, use a soft pool toothbrush to scrape it away gently.
- Step 4: Until the pool is evident, clean any leftover residue.
If you complete all of the steps outlined above, you should find your fiberglass swimming pool steps looking brand new in no time. Your friends and family will enjoy using them much more than before when they aren’t surrounded by dirt, algae, and other debris.
I hope this article was of help! One of the best ways to clean fiberglass pool steps is with a pressure washer. This will get the stains and mildew off the surface, but it will also give a nice shine that shows off the surface once more.