A swimming pool liner is flooring in the pool that is affixed to the ground and walls of it. It is made of high-quality PVC material, which is a colored thermoplastic. The vinyl material is most durable compared to other liner alternatives. If taken proper care, it can last up to 10-15 years. It prevents water leakage and helps keep the water in the pool.
You can customize the pool liners with eye-catchy designs to improve the pool look and make it more attractive. Depending on the size of your swimming pool, installing a swimming pool liner yourself could help you avoid spending a lot of money you don’t need to!
With the correct calculations, your liner will fit like a mitten. It’s genuinely not that much of a commotion. This item will help you determine vinyl pool interlining establishment for in-ground pools. Read on to learn more!
Table of Contents
The Objective of a Pool Liner
Pool liners are like stylish containers to hold your swimming water. Apart from styling the pools, it gives strength and keeps aging walls from falling off. These liners can come in many materials, like vinyl, fiberglass, gunite, etc. So, if you learn how to install your liner without putting a wrinkle in it, it will save you vast amounts on pool service.
Replacing an Old Pool Liner
If you are considering replacing a pool liner and don’t want to bear the cost of hiring a professional, we’re here for you! It is straightforward to install a new liner by yourself. By following a few simple steps we have provided, you can do the job without any complexity.
You must pull out the old liner before lodging the new one. Please confirm that it won’t rain for at least 3-5 days before you begin. Let’s start with the steps:
Step 1: Measurement
Measuring the correct dimensions of the pool is an essential part. If the measurements are wrong, the liner won’t fit your pool accurately and will not be watertight. It should be measured according to the shape. Once you have adequate measurements, you can customize and buy the right liner for your pool.
Step 2: Draining the pool
The next step is to drain your pool entirely. There are many ways, but the best and cheapest way is to draw the water off to another container with a hose. It is easy and less time-consuming. Using other methods to remove the water, like a submersible pump, may be expensive and take more time.
Step 3: Removal of the old liner
Before you remove the liner, you need to be assured that all the pool accessories have been removed, like ladders, lights, skimmers, etc.
Once done, you can carefully remove the old liner by breaking it into smaller pieces using a knife or scissors. It should be done with the utmost care, so it does not harm the main drain or pumpings.
Step 4: Prepare the base.
Before installing a new liner, the essential preparation of the pool floor is crucial. Usually, sand is filled at the bottom of the pool, and it is ensured that the surface is perfectly even and smooth.
But if your pool has a cemented floor, ensure it is free of residues.
Step 5: Amending
Ensure that there is no rust or damage on the walls and if found any, handle it suitably. Repair or reinstall wherever needed and make sure the surface is perfectly even. Check if there’s some place for the liner to stick onto the edges. If not, create a border using wall foam, sand, or wallboard.
Step 6: Install the new liner
The more people available for the work, the better. You will need your family and friends. As many as you can get for your help. After that, choose a day when it is breezeless and warm because it will prevent the liner from blowing away and help you do the task without any struggle.
Begin with unrolling the liner from the bottom of the pool, and pull the liner up to the edge. To keep it in place, attach it with a clamp or a hook, and keep adjusting the liner accordingly to make it beyond the pool.
Step 7: Refill the pool
Once you’ve installed the liner properly, begin to refill the pool. While the water is being filled, observe if the liner does not shrink or move from its place.
Step 8: Reinstall Accessories
The final step after filling the water is to reinstall the accessories. You can place the old accessories back in their place. And make the pool swim-ready.
Summing up, following these few simple steps, you’ll be able to refurbish your pool and improve it. Despite this, professional help is always more recommended than doing it yourself, as it saves money and time.
Installing the New Liner
It’s crucial to finish all these procedures before using your pool again since your pool liner needs to be entirely in place before it can be used again. Follow the steps given below:
- First and foremost, ensure everyone who helps you close the liner enters the pool barefoot to avoid getting stuck.
- The liner has to be placed on the shallow side of the pool floor after removing it from the warm place.
- The liner will have a label indicating where the deep end is located. Make sure this label is facing the water.
- Along the length of the pool, unfold and roll up the liner. Then along the top edge of the liner, there will be specific beading welding that fits into the aperture of the liner lock that is already connected to the top of the pool.
- Start from one corner and press the liner into the other with your foot after ensuring all the corners align with the floor levels. Lift the liner’s wall and slide the beading into the liner lock’s top while retaining the pressure so that it is secured in place.
- Use the method above to move around the pool and block the decorative path. Make sure the four corners are aligned correctly, and transfer the trim to ensure this is done.
Placing the pool liner won’t be enough, either. You have to make sure it stays in place. Using an industrial wet and dry vacuum to position and secure the liner is the most efficient method. To achieve a perfect fit, the vacuum will pull the liner down the rear of the walls. Additionally, masking tape can be used to secure the liner in position. I hope this article helped you learn to install a new swimming pool liner with a few extra helping hands.