• Skip to primary navigation
  • Skip to main content

Honey Sweet Home

Swimming Pool Ladder Guide

  • Home
  • Blog
  • Pool Ladder Accessories
  • Contact Us
  • About Us
  • Sitemap

Top 5 Pool Ladder Holders [Deck Flange]

Ladder Accessories ·

Are you looking for the best deck flanges to mount a pool ladder to the deck? We have shortlisted the top 5 pool ladder holders you get, whether be it for replacing or mounting a new one.

To sustain the pool ladder and handrails for a long time, you would need the best quality accessories (count them as small investments or hidden investments) like the anchors, shielding plates, rubber pads for the ladder, and screws.

Pool ladder flanges are a one-time investment and should be pickup up with a bit to research as they hold the heavy pool steps in their place, and in a way, you are dependent on these mounts to control your weight while using the steps.

Best Deck Flange to Mount Pool Ladder

Top Pick
Blue Wave NE1228PR Aluminum Deck Flanges

Blue Wave NE1228PR Aluminum Deck Flanges

  • Dimension: 3.5 x 3.5 x 2.5 inches
  • Units: 2
  • Color: White
9.7
Check Price
Value for Money
Swimline Cast Aluminum Above Ground Pool Ladder Replacement Deck Flange

Swimline Cast Aluminum Above Ground Pool Ladder Replacement Deck Flange

  • Dimension: 3.3 x 4.99 x 2.5 inches
  • Units: 1
  • Color: White
9.5
Check Price
Saftron 3 inch Surface-mount

Saftron 3 inch Surface-mount

  • Dimension: 3 x 3 x 1.9 inches
  • Units: 1
  • Color: White
9.2
Check Price
Saftron Polymer Mounting Base

Saftron Polymer Mounting Base

  • Dimension: 1.93 x 6 inches
  • Units: 1
  • Color: 4 Options
9.1
Check Price
Myard Surface Mount Base Anchor Flange

Myard Surface Mount Base Anchor Flange

  • Dimension: 6.54 x 5.55 x 5.51 inches
  • Units: 1
  • Color: Ivory White
9.1
Check Price

1. Blue Wave Aluminum Deck Flanges

pool ladder mount

Check Price

Blue Wave NE1228PR aluminum deck flanges are suitable for above ground pool steps. This product has an inner diameter of 1.5 inches and is made of rugged aluminum; it is light in weight compared to other metal holders.

The best thing about this product is that it comes in a set of two at a low price. The anchor’s color is white, which looks plain and classic. It weighs 0.4 pounds which is very light although being of metal. It ensures holding the handrail rods extremely tight in its place.

Highlights:

  • Dimensions are 3.5 x 3.5 x 2.5 inches.
  • Easy to Install.

2. Swimline Cast Aluminum Above Ground Pool Ladder Deck Flange

above ground pool ladder replacement deck flange

Check Price

The Swimline deck flange is made with cast aluminum metal, similar to the previous product, which makes it extremely durable. It can be bought as a single piece; you need to choose the quantity of this flange you need(two deck flanges are required in order to mount a handrail or a ladder).

Its height is 2.5 inches, which is quite tall, and its circumference measures 1.5 inches. Apart from having three holes for putting in screws, it has a large spot on its body for putting a large screw that fits into the handrail, ensuring the railing is set permanently and won’t come out.

Highlights:

  • Dimensions are 3.3 x 3 x 2.5 inches.
  • Made with cast aluminum.

3. Saftron 3-inch Surface-Mount Base

deck flange to mount pool ladder

Check Price

Saftron’s three-inch surface mount base is easy to install in swimming pool ladders with wooden or concrete decks with no harm to the surface.

Saftron is a renowned brand that sells high-quality swimming pool ladders and accessories. These holders can fit any location; during the installation, you must drill four holes to fix it into the wall and put up the screws. This product is made with non-degradable material and is unaffected by pool chemicals like chlorine and salts. This item weighs 1 pound, is available in white color, and measures 3 inches.

Highlights

  • It is maintenance-free and unbreakable.
  • It would never chip and flake off.
  • It is made with high-quality plastic.

4. Saftron Polymer Pool Handrails and Ladders Surface Mounting Base

deck mount pool ladder

Check Price

The Saftron mounting base is made of polymer; vinyl polymer makes it highly compact to be more accurate. The holders are easy to fix, and the ladder or handrails would easily fit into the holder without any cracks; It is to be used with a 1.90-inch railing or ladders.

This mounting base measures approximately 6 inches in length and is made with a hard shell resistant to chlorine, salts, or even acids in the pool. Once installed, it can take a lot of loads, so climbing up or down the ladders vigorously won’t cause any issues, and the ladder will stay in place. It is also UV-resistant and doesn’t get warm even during the hottest days of summer. The item weighs about 1.5 pounds and comes in four colors.

Highlights:

  • It won’t chip and flake off because it is made of vinyl.
  • Incredibly durable, being light in weight.

5. Myard Surface Mount Base Anchor Flange

pool ladder holder for deck

Check Price

Myard’s surface mount base anchor flange comes in ivory white color made with nylon material that looks elegant. Everyone knows that nylon is one of the strongest artificial fibers that won’t get degraded by any of the chemicals in the pool.

They are utterly impervious to salt chlorinators or any acidic environment. Handrails of precisely 1.9 inches are perfect for this holder. This product measures 6 inches in height and is suitable for concrete or wooden deck. It must be fixed with three sets of ground screws and washers (included in the box). It won’t get too hot when in direct sunlight on a hot summer day.

Highlights:

  • It has a taper-cone shape to fit handrails easily in it.
  • UV-Resistant.

FAQs:

Final verdict

With all the features and highlights being considered, you need to decide and check which one fits best for your pool and would sustain for a long. You should remember some points, like the dimensions, size, weight, durability, and price. So go on.

Pool Ladder Holders

Steven Brogan

Steven Brogan is a former state-level swimmer. He loves writing and testing lifestyle products.Connect with him.

© 2023 Honeysweethome.com

Honeysweethome.com is a participant in the Amazon Services LLC Associates Program and earns from qualifying purchases.

Home

Contact Us

About Us

Privacy Policy

Affiliate Disclosure

download honeysweethome.com andriod app from amazon app store

Connect With Us:

Facebook Youtube Pinterest
DMCA.com Protection Status